Bottle opener – Wikipedia

Device for removing metallic caps from bottles

Using a bottle opener

A bottle opener is a device that enables the removal of metallic element bottle caps from field glass bottles. More broadly, it might be thought to include corkscrews used to remove cork or formative stoppers from wine bottles. A metallic bottle hood is affixed to the rim of the neck of a bottle by being pleated or ruffled around the flange. A bottle undoer is a specialize lever inserted beneath the ruffle metalworking, which uses a detail on the bottle cap as a fulcrum on which to pivot.

Varieties [edit ]

There are several distinct designs of such bottle openers. Wall mounted openers are typically found behind bars in public house, whilst hand-tool bottle openers tend to be found and used in domestic environments. The functional elements of bottle openers ( a tooth or brim to catch the bottom of the capital, a fulcrum across which to exert the force that will remove the cap, and normally a lever for mechanical advantage ) tend to be consistent, although they can vary in design and aesthetics .
A elementary bottle opener

Crown bob opener [edit ]

Invented at the lapp time as the crown bob, it is the original bottle undoer. But ampere well as being portable it besides comes as a fix device to be attached to vertical surfaces, often with a tray to catch the bottle exceed. It does not open wine bottles. A childlike undoer is a while of metallic element with a rectangular or rounded open in one end and a firm cover bombastic adequate to be gripped between the ovolo and forefingers on the early. The opening contains a lip that is placed under the edge of the bottle top, pulling it off when upward force is applied to the handle end of the opener .

accelerate opener ( ‘bar blade ‘ ) [edit ]

The accelerate opener is a flat sword of steel approximately 4 cm wide and 16 cm long with a hitchhike hole at one end and a letterbox write out at the early to remove the crown seals from a bottle. They go under the names ‘speed undoer ‘, ‘popper ‘, ‘mamba ‘, ‘ barricade key ’, and most popularly ‘bar blade ‘. The finger fix may be used to pull bottles out of ice, by placing the hole over the neck of the bottle, then lifting it. The amphetamine undoer is wide used by master bartenders in Canada, the United States, and the UK. Carried in the pouch or against the body or on a zip up string, it is both convenient and fast for the modern bartender. It is advantageous in that it is comfortable to open several bottles in rapid succession, and with more dash than other types of bottle undoer. consequently, ‘bar blading ‘ is much partially of banish flare routines .
Wall-mounted bottle undoer with magnet to catch lids Works the same as the lever variation, except that it is attached to the wall, to allow for simpler bottle-opening, which can be done with one hand. The bottle capital can fall into a bottle crown catcher mounted below the opener, or it can be retrieved after removal from the bottle. A random variable to this are similar types of openers mounted on older peddle machines .
besides known as a beverage undoer, these normally includes a bottle opener of the elementary bottle undoer style but includes diverse other openers such as for plastic bottles or metal beverage cans .

technique [edit ]

Under most use, a bottle opener functions as a second-class lever : the fulcrum is the far end of the bottle undoer, placed on the top of the crown, with the output signal at the about end of the bottle opener, on the peak border, between the fulcrum and the hand : in these cases, one pushes up on the lever.

however, one may alternatively use it as a excellent lever, by placing the about end on the top of the crown, and the far end under the crown border, then pushing down on the lever ( frankincense the output is on the opposite side of the fulcrum from the hand ). This is peculiarly used with bar blades, which form an dense angle. mechanically, this is a marginally less effective pry, as the effort arm is shorter, but the action of pushing down is marginally anatomically easier. While most lever-type bottle openers can be used in either shape, the designed use can be determined if one of the edges is curved, in which case this boundary is designed to sit in the middle of the pate, as the bend concentrates pressure, deforming the crown, and a curved edge does not connect with american samoa much of the crown boundary, hence being suboptimal and slipping more frequently if used to connect with the crown edge. This deviation can be seen in comparing the traditional opener and contemporary barroom blade at right .

Corkscrews [edit ]

Waiter ‘s friend [edit ]

Opened Waiter ‘s supporter The ‘waiter ‘s friend ‘ or ‘wine cardinal ‘ consists of a flat housing ( much plastic covered ) exchangeable to a swiss united states army knife with a corkscrew and lever ( which doubles as peak bob opener ) with either a knife or auto-foiler to remove the foil exceed of wine bottles and then the cork. Designed to be screwed in to within 1 full moon rotation before the end of the screw ( more will pierce the bottom of the cork and solution in extra flotsam on the coat of the wine ) before levering out the cork .

Mounted corkscrew [edit ]

This creature is used by businesses that need to open a big bulk of wine efficiently and without waste or breakage. It is a big boldness tubular device, fixed at a 45° slant to the barricade, with a pry pivoted halfway and extend towards the drug user. The bottle ‘s neck is inserted securely in the lower aperture of the tube and the lever pulled down securely and steadily to the bottom. This drives a corkscrew into the cork at a regular depth each meter. When the pry is returned to its original placement it extracts the phellem. When the bottle is removed pull the lever to expose the phellem at the bed, it loosens the bob and returns the pry firm to its starting position, whereupon the cork will then fall out .

Twin prong cork puller [edit ]

A twin prong phellem puller The twin prong cork puller, besides called the Butler ‘s Friend [ 1 ] or Ah-so, is shaped like a bombastic keystone with a square egg-shaped manage about 5 cm × 8 curium, and two slender metallic element strips, approximately 10 cm long, 5 millimeter wide, and 0.5 millimeter thick, descending in tandem from the plaza of the handle. The two strips are spread open and then wiggled into the space between the cork and the bottle on either side. once in full in place, a bend and pull of the handle causes friction to turn the cork and pull it out of the bottle .

Injuries [edit ]

New Zealand has had in modal 40 injuries recorded by the Accident Compensation Corporation per year ascribable to injuries while opening a beer bottle that required to remove a alloy eyelid. [ 2 ] Two ophthalmologists Cam Loveridge-Easther and Sacha Moore wrote a letter recommending for warnings to be put on bottles. [ 2 ]

References [edit ]

reservoir : https://thaitrungkien.com
Category : Tutorial

Related Posts

Trả lời

Email của bạn sẽ không được hiển thị công khai.