How to Turn on Your Sprinkler System

When the dreaded winter temper last gives way to the beautiful wake up of spring, it ’ randomness time to get the lawn back to its vibrant spring green. If your sprinkler system was offline during the cold, starting it back up shouldn ’ t be a complicated tax .
Turning the system on in the spring is much easier than many homeowners think. You can choose to do it yourself .
It should take you no more than 30 minutes to a couple of hours to complete. The actual time will depend on the size and complexity of the system .

How Much Does It Cost to De-Winterize Your Sprinkler System?

Before we dive into the de-winterization process, you may be itching to know how much it will cost you.

Turning on the sprinkler system can cost anything from $ 75 to upwards of $ 1000. This will depend on how many irrigation zones there are on your system and the modal cost in your area .
Another consideration will be any repairs you may need to make — turning on the sprinkler provides a adept opportunity to inspect your irrigation system ’ s components to check if all the parts are working well .
If you notice anything amiss, preceptor ’ t hesitate to contact Sprinkler Supply Store for a wide range of substitution parts for your sprinkler system .
Jeffrey Hall Customer Reivew
Jeffrey Hall | Customer Review

When to De-Winterize Your Irrigation System

Knowing when to turn on your system depends on where you live, as you ’ ll typically base your decision on the area ’ s survive frost date .
From there, you have to wait at least two weeks as that ’ s when the background stops freezing at night .
You will besides need to keep an eye out for projected spring weather. When the prognosis starts showing back-to-back affectionate weather over 32 degrees Fahrenheit, give it a week for the crunch to thaw wholly before turning on your irrigation system .
time will be earlier in the spring for southerly states and late for northerly states .

Turning on the Sprinkler System After Winter

Step 1: Check if the Ground Has Thawed

Before you turn on the irrigation system, check if the grind has thawed adequate after the winter frost .
You will need to dig at least one foot into the ground. If there are placid signs of frost, give it another week or two .
Activating the sprinkler system when the footing is even frigid can cause cracks and wrong to your equipment. If water can no longer wait, use an antique hose in the interim .
arrest for ground frost at weekly intervals. Once the dirt is frost-free, it ’ second clock time to move on to the future footfall .

Step 2: Turn the Vacuum Breaker Valves Off and the Solenoid Valves On

To get the sprinkler system back on, turn off the two vacuum breaker stop valves that are on each side of the vacuum surf valve .
The ball valves will be the ones in a analogue placement to the pipes. You will need to put the vacuum circuit breaker valve to an off situation to keep water from flowing through .
Do this by turning the vacuum breaker valve 45 degrees in a counter-clockwise direction until the valves are vertical to the pipes .
then, turn the solenoid valves — the valve at the acme of the vacuum breaker, pictured below — 90 degrees in a counter-clockwise steering .
Rain Bird - 236239 - E-Z Bleed Solenoid Assembly Kit
Rain Bird – 236239
The valves may leak a little when you first turn them on, but they should stop after a few minutes. If the valves continue to run, it could be a sign of the zodiac of winter wrong .
note : Make certain to turn the valve on deoxyadenosine monophosphate lento as possible to prevent excessively much atmospheric pressure from damaging the equipment .

Step 3: Check the Sprinkler Heads

sprinkler head with a control valve to handle water flow
Rain Bird – 1804SAM – 4 ” Pop-up Spray Head

Check each sprinkler capitulum for damage — this helps to prevent press build-up if any of the sprinklers are blocked or damaged .
If the sprinkler steer is damaged, unscrew the nozzle from the head and get a replacement .
You can find options at the Sprinkler Supply Store .
If the stallion lead assembly is damaged, consult irrigation alimony professionals like those besides at the Sprinkler Supply Store for a exhaustive judgment and advice on the best replacement parts .
future, thoroughly clean the nozzles using a small brush or soup-strainer. If the sprinkler heads are blocked, it will affect the spray blueprint and leave patches of lawn unwatered .

Step 4: Slowly Turn on the Water

Locate the main valve that connects your sprinkler system to your home water issue. then, taking your time, open it .
lento do then until you can hear the sound of the water system flowing through. Wait about 10 minutes for the body of water to feed into the mainline .
When it ’ south fourth dimension, every five minutes open the valve a fiddling wide until it ’ second wholly opened .
Caution: Ensure you turn the valve on deoxyadenosine monophosphate lento as possible. If you open the main water supply besides promptly, the water atmospheric pressure can create a water hammer .
This happens when water surges through the irrigation system at an extremely high atmospheric pressure, causing the pipes, valves, or sprinkler heads to burst .

Step 5: Check Irrigation Zones

once the urine is flowing through the system, you need to test if all the sprinkler zones are working properly .
To do this, use the control empanel to start the irrigation program one zone at a time. Keep an eye on that irrigation zone and check for the keep up :

  • Even water flow.
  • A consistent spray pattern. 
  • Wet areas in between the sprinkler zones — any soaked areas could indicate that there are broken pipes in the waterline.

If you notice any anomalies in the atomizer radiation pattern and water lineage, you need to shut off the main water supply until the problem is deal with .
If you have leaks in your system and need help identify and fixing the issue, the Sprinkler Supply Store is hera to help .

Step 6: Put the Timer Back on


Orbit – 58910 – 1-Dial 2-Port Hose Faucet Timer
After you test all the zones on your irrigation system and find everything working well, you can now set your timer .
Set the date and time correctly and turn on the setting of your choice .

Your Sprinkler System Is Ready for Spring

Your sprinkler system is nowadays rear on-line, ready to turn your lawn into a lush park bounce joy .
For excess aid, hera ’ s a bit-by-bit television :

If you need any avail at any point of the action, get in touch with the Sprinkler Supply Store. We ’ ra happy to talk to you about your issues, and we ’ ll provision you with high-grade parts at the best prices .
Jeff Stevenson customer review
Jeff Stevenson | Customer Review

source : https://thaitrungkien.com
Category : Tutorial

Related Posts

Trả lời

Email của bạn sẽ không được hiển thị công khai.