Monkey’s fist – Wikipedia

Knot to weight the end of a r-2

Monkey’s fist
Knot Monkey Fist.jpg
Category Stopper
Typical use tied at the end of a rope to serve as a weight or an anchor
ABoK #2202
Instructions [1]

A monkey’s fist or monkey paw is a character of knot, therefore named because it looks reasonably like a small bunch together fist or paw. It is tied at the end of a rope to serve as a system of weights, making it easier to throw, and besides as an cosmetic nautical mile. This type of burden r-2 can be used as a hand-to-hand weapon, called a slungshot by sailors. It was besides used in the past as an anchor in rock climb, by stuffing it into a fracture. It is still sometimes used today in sandstone, as in the Elbe Sandstone Mountains in Germany .

description [edit ]

Arthur Beale an ornamental tamper ‘s fist with a hard eye marry, custom-made at the chandlers

The tamper ‘s fist is a ball-shaped cover with six surface parts presenting a regular over-one-and-under-one weave. This weave is normally doubled or tripled to present an appearance that superficially resembles a Turk’s-head. Like the Turk’s-head, the knot is tied with a unmarried ground, but here the resemblance ceases. The Turk’s-head diagram consists of a individual channel ; the common putter ‘s fist diagram has three discriminate lines, which are best represented by three interlocking circles, in the best Ballantine tradition. To tie a ravel on this diagram with a single maroon, it is necessity to complete each circle in turn—that is, to double or triple it, as the case may be—and when this has been done to deflect the strand into another lap which is completed in turn before commencing the third gear and end circle.

The Ashley Book of Knots[1]

The tamper ‘s fist nautical mile is most frequently used as the weight in a pant line. The telephone line would have the tamper ‘s fist on one end, an eye lap joint or bowline on the early, with about 30 feet ( ~10 metres ) of line between. A lightweight self-feeder lineage would be tied to the bowline, then the leaden billow line could be hurled between ship and dock. The other end of the lightweight course would be attached to a heavier-weight telephone line, allowing it to be drawn to the target easily. The knot is much tied around a belittled weight, such as a stone, marble, tight fold of wallpaper, grapeshot, or a musical composition of wood. however, this may be considered insecure and therefore poor seamanship. The UK Maritime and Coastguard Agency ‘s ( MCA ) publication “ Code of Safe Working Practices for Merchant Seamen ”, Section 25.3.2, states that “ heaving lines should be constructed with a ‘monkey ’ randomness fist ‘ at one end. To prevent personal injury, the ‘fist ‘ should be made only with rope and should not contain lend burden materials ”. [ 2 ] They should not be attached by alloy or fictile clip to the heave line. Some port authorities instruct linesmen to cut off monkey ‘s fists that use these fastenings. [ 3 ]

Tying [edit ]

tying the Monkeys fist The three coils of cordage in a putter ‘s fist phase in effect a set of Borromean rings in three dimensions. This is most obvious when tied flatcar. The rings should then be started near focus on, coiled from away inwards, in all three put of rings, and the third gear dress finished by letting the end exit through the trilateral hole at the center. subsequent reduce should let the outside edges curl to form an opposing trilateral hole around the main part. This is suitable if a band formed object is to be contained in the central cavity around the main function. If the aim has no hole, it might be desirable to have the ends exit the knot at or near the central triangular hole .

other applications [edit ]

cufflink made from a wire tied into a Monkey’s fist knot A imp ‘s fist can be used on two ends of a tow lines of one side a fish net which is then thrown from one trawler to another, allowing the final to be cast and set between two boats so the trawl can be used between the two, in pair trawling [ 4 ] where the tow or catch is negotiated between both parties. This makes it easier to catch fish given the greater come on area between both boats to turn around and catch missed pisces from the ocean much more promptly. once all fish have been hauled up from the sea, tow lines of the pisces net is returned by direction of throw both putter ‘s fists back to the host trawler. alternatively, a tamper fist can be used as a burden of a heave line thrown to over to an opposing embark to bring two ships together. [ 5 ] Monkey ‘s fists are normally used as a convenient and unobtrusive method of storing and transporting valued gemstones. [ citation needed ] A throwing monkey ‘s fist can be created by tying around a fleshy corporeal such as iron ball, or stone. A floating imp ‘s fist can be created by tying around a buoyant material such as cork, styrofoam, vent filled ring or ball. It is besides the most common knot used in a pair for cufflinks where it is considered a “ silk nautical mile. ” tamper fists have become democratic as chief deployment handles for sport chute systems. tamper fists are frequently used in modern begleri as they are gentler on the knuckles than metal beads.

imp fists are much used in shibari and bondage, tied partway down the r-2 to be used as a gag .

See besides [edit ]

Notes [edit ]

reference : https://thaitrungkien.com
Category : Tutorial

Related Posts

Trả lời

Email của bạn sẽ không được hiển thị công khai.