How To Tap a Keg of Beer in 5 Easy Steps

How To Tap A Keg - Beer Kegs 1
image via Steven Feather ( Flickr CC )
If you know what a beer tap is but you ’ re looking to learn how to tap a keg at home using a classic party pump, you may like to learn a few basic steps to get the best out of your chosen brew.

How to Tap a Keg

1 – Prep

One authoritative piece of research before you plan to tap a keg : identify the type of coupling system of your keg, and acquire the chastise tap/coupler/pump type. The majority of beer kegs sold in the US use the american ‘ D ’ system. Imports will use the european ‘ S ’ system or a count of other less-common systems. Your keg allocator should point you in the veracious guidance and will much supply the decline parts excessively .

2 – Chill

Ice your keg. The whole keg, not barely the bottomland third base. This will help you late with pouring a perfect point, and not a cup of foam. A big bucket or drivel bag can help you stuff internal-combustion engine around the sides of the keg and keep it tightly packed. Leave the keg to chill for several hours. Don ’ thyroxine forget to besides ice your tap and beer line for about an hour before you pour .

3 – Connect

Remove any formative or cardboard from around the tap fixture at the top of the keg. With the pump handle up ( this is the murder position ), trace up the coupling lug with the equate openings on the keg valve. While applying down pressure, turn the tap system clockwise angstrom far as it will go ( about 90 degrees ).

Tap A Keg of Beer - Party Pump Tap Faucet Handle
picture via Aaron Hockley ( Flickr CC )

4 – Engage

Push the pump handle down ( this is the on position ). This allows boast to enter the keg, and the beer to flow out. Check the seat. If you see bubbles around the association, then it is not seated correctly and you will have to turn the heart handle back off and disconnect the pump and try again .

5 – Pour

With a full, new keg, you will not have to pump for the first few pints – there is already enough imperativeness within the keg to get the beer flowing. Simply push gloomy on the valve at the end of the beer line, and pour it into your drink vessel. It is very likely that the inaugural pint will be all foam. This is common, and you can either set it away or discard it. After pouring several pints, you may wish to use the pump to build up the coerce in the keg again from the displace liquid .
Bonus Pro Tip: Open the pouring valve first, then pump the wield until your drink vessel is wax, then stop pump. only pump with the pouring valve open.

There you have it : How To Tap A Keg. Raise a toast. Drink Responsibly .
Cheers !

source : https://thaitrungkien.com
Category : Tutorial

Related Posts

Trả lời

Email của bạn sẽ không được hiển thị công khai.