Table of Contents
How a Lock Works
Before rekeying a lock, it helps to understand how lock cultivate. The type of lock found on most doorknobs and deadbolts is called a peg and tumbler lock. It contains a cylindrical plug that holds a series of pins and springs. The pins are of varying lengths to allow a specifically cut key human body to insert and turn the lock. For this to work, the length of the pins must match the depth of the grooves in the key .
To make a lock oeuvre with a different key, you need to disassemble the lock, remove the pins, and replace them with ones that match the cuts in the key you wish to use. Let ’ s teach how .
How to Rekey a Lock
If you have a traditional peg and tumbler engage, rekeying international relations and security network ’ deoxythymidine monophosphate a unmanageable as it sounds. First, you ’ ll need to purchase a rekey kit for the mark of lock you have. The kit should contain assorted tools to aid in the lock ’ south removal and a set of different sized pins.
Reading: How to Rekey a Lock
The 5 Best Electronic Deadbolts
Step 1: Remove the Doorknob
The beginning step is to remove the doorknob from the door. To do this, you ’ ll need to align the holes in the cylinder by either turning the knob counterclockwise and holding it or inserting and turning the key a quarter turn to the right. ( This step will vary by maker. )
once the holes are aligned, insert the remover tool, press, and pop the knob off, separating it from the shank .
Step 2: Remove the Cylinder
once you have the knob removed, you need to remove the cylinder from the inside. If your knob has a cap on the back, you ’ ll want to remove that using an allow tool. then, push the cylinder complimentary from front to back .
Step 3: Take Out the C-Clip
future, remove the C-clip holding the cylinder in place .
Step 4: Attach Key Plug
Remove the key spark plug from its house using the follower tube included in your kit. Attach it to the back of the cylinder and insert the key in the lock .
Some locks will require that you turn the key 45-degrees. immediately, push the cylinder spark plug out of the cylinder, leaving the punch follower inside the caparison to hold pins and springs in place.
Read more : Preparing for a Hurricane or Tropical Storm
Step 5: Dump the Old Pins
Dump out the pins in the ballyhoo. Remove the key and insert the raw key .
Step 6: Insert New Pins
Insert fresh pins as indicated with the kit ’ second instructions. Make surely they are flower on the top of the chew .
Step 7: Replace the Plug
Replace the hack into the cylinder, slowly pushing out the plug follower as you go. once inserted, try the key and make certain it turns. Remove the follower and replace the C-clip until it snaps in station .
Step 8: Reattach Knob to Door
Reinsert the cylinder into the knob and reattach the knob to the door .
Step 9: Test the Lock
once everything is reassembled and feel batten, test the interlock .
How to Rekey a Deadbolt Lock
If your bolt requires a separate key from your submission doorknob, you can rekey it if they are the lapp stigmatize. To rekey the bolt, remove it from the door and repin as you do a doorknob .
- Make sure the bolt is out and remove the screws holding the deadbolt to the door.
- Remove the cylinder from the housing and the endcap from the cylinder. Take out the retainer pin.
- Repin as you would for a doorknob, then replace the cylinder into the housing, replace the retainer pin and endcap, and return it to the housing.
- Re-check that the bolt is out, then reattach the lock to the door.
When to Change Your Door Locks Rather Than Rekey
possibly you ’ re diffident if you should rekey your locks or replace them. There are a few instances where replacing them is the better option.
Read more : How to Build an Igloo in 10 Steps | Winter Fun
- If you’ve lost your key and don’t have a spare, and your knob is locked, you won’t be able to remove the lock to rekey it. You’ll need to replace it.
- You’re doing a bit of remodeling that includes replacing doors and you want an updated style. That would call for replacing your locks.
- Rekeying won’t help worn or damaged locks, either. It’s time to replace the locks.
- If you don’t feel confident rekeying your lock and can’t find someone to do it for you, then you’ll need to change them.
- To rekey locks to use the same key, all of them must be from the same manufacturer. You can’t rekey a Kwikset lock to use a Schlage key because each maker’s locks have different size holes that will only accept their own keys. So, if all of your doors have different brands of locks, choose the one you want to match, replace the others, then rekey them.