How to Pair a Samsung Remote to a TV

What to Know

  • Locate the IR receiver on your TV (usually lowest portion of the TV). Then turn on the TV on.
  • Point your remote at the IR receiver, and press and hold the Return and Play/Pause buttons. 
  • Wait for the Pairing Complete message to appear on the TV.

This article explains how to pair a Samsung distant to a television receiver .

How Do I Pair My Samsung Remote to My television ?

Your Samsung Smart Remote is designed to automatically connect to your newly Samsung television when you inaugural get it, but you can besides pair it manually if you need to. If you get a new distant, or you want to connect your Samsung Smart Remote to a different Samsung television, then you can use this manual connection operation.

Your Samsung distant can lone control one television receiver at a time. If you pair your remote control to a modern television, you will have to go through this procedure again if you want to use it with the original television in the future .

  1. Turn on your Samsung television using the ability release on the television or a outside that ’ s already paired .

  2. Locate the distant control detector on the television receiver .
    It ’ south normally on the lower right side of the television, but it may be on the bottom center .
  3. Point your distant at the distant master detector .

  4. press and hold the Return and Play/Pause buttons on the outside for at least three seconds .

  5. When the Pairing Complete message appears on the television receiver, release the Return and Play/Pause buttons .
    If the message on your television receiver says Not Available, the outback may not be compatible with your television receiver. If you ’ re trying to pair a surrogate Samsung Smart Remote or a OneRemote, check with Samsung to make sure the distant and television receiver are compatible .

How Do I Reset My Samsung Remote Control ?

If your Samsung distant is malfunctioning, you may need to reset it. The reset routine requires removal of the batteries, so this is a good prison term to insert new batteries if you haven ’ thymine done so in a while. watery batteries can besides cause a fortune of issues .

hera ’ s how to reset a Samsung outback control :

  1. Remove the batteries from the distant .

  2. Wait at least eight seconds .

  3. Put the batteries back in, or insert new batteries .

  4. Pair the distant to your television using the procedure from the previous part .

What if My Samsung Remote still Won ’ t Pair ?

If your outside won ’ triiodothyronine pair, and you don ’ deoxythymidine monophosphate see an error message on your television, then you need to verify that it ’ s actually sending an infrared ( IR ) sign to your television. While the IR signals sent by your Samsung remote control are inconspicuous to the naked eye, it will show up in the camera app on your phone.

here ’ s how to make indisputable your Samsung outback is transmitting an IR signal :

  1. Open the television camera app on your call .

  2. Point the outback at your telephone, so that you can see the front of the distant in your camera app .
    You can besides use a digital television camera if it has a live view LCD display and not barely an ocular finder .
  3. Push a clitoris on the distant, like the power or volume button .
    Some Samsung remotes use Bluetooth for every clitoris but the power button, so the might push button is the best one to use for this test .
  4. If the remote control sends a signal, you ’ ll see the IR vector light up in your camera app .
    If you don ’ metric ton see anything light up, try replacing the batteries in the outside. If that doesn ’ thymine help, the remote control may need to be replaced. Contact Samsung to see if the distant is still under guarantee .

How Do I Pair My Samsung Smart Touch Remote ?

The Samsung Smart Touch Remote uses a combination of IR and Bluetooth. The ability button uses an IR emitter, while the other buttons send signals to the television via Bluetooth. That means the outback can power your television on and off even if it isn ’ metric ton paired, so if your remote control turns your television receiver on, but none of the other buttons work, you ’ ll need to pair it .

here ’ s how to pair a Samsung Smart Touch Remote :

  1. Turn the television on .

  2. Point the distant at the IR receiver on the television, and keep it aimed in that guidance throughout the pair procedure .

  3. press and hold the Return and Guide buttons on your outside for three seconds .

  4. Watch the lower justly share of the television receiver riddle .

  5. If the pairing process is successful, you ’ ll see a green circle in the lower right separate of the blind .
    If it ’ sulfur abortive, you ’ ll see a red X on the television. Try to pair the outside again, and contact Samsung for further aid if it still doesn ’ thyroxine work .

faq

  • How do I turn on a Samsung TV without a remote?

    Samsung TVs normally have a modest control condition box in the lower-right corner, under the edge of the screen. Hold the button to turn the adjust on.

  • How do I reset a Samsung remote?

    If your Samsung outside stops working systematically, a reset may help. First, remove the batteries. then, hold the Power button for about eight seconds. Put the batteries back in, and then re-pair the distant with the television if necessary .

beginning : https://thaitrungkien.com
Category : Tutorial

Related Posts

Trả lời

Email của bạn sẽ không được hiển thị công khai.