How to Patch a Carpet

Project details



out of




Repair kit and roller, $30

Estimated Time

30 minutes

Q: There ‘s a 3-inch scorch mark on my wall-to-wall carpet where an ember from the fireplace landed. How can I make it go away ?
—Dan Largesse, Danbury, Conn .
A: Tom Silva replies: fortunately, you do n’t have to buy new carpet or even rearrange the furniture to cover isolated damage from burns, crimson wine stains, and other blemishes. For the monetary value of a bandage kit, some glue, and a leading roller—about $ 30 total—you can make an inconspicuous rectify that will last the life sentence of the carpet .
The basic kit, available at flooring distributors and on-line, includes a hockey-puck-sized carpet cutter and adhesive material disks to glue the spot in place. The cutter slices out the damaged department and an identically size substitute patch. If you do n’t have any leftover scraps, harvest a patch from the back of a cupboard, beneath a radiator, or under furniture that ‘s rarely moved .
Patch repairs work good on plush, tufted voltaic pile with no patterns that require duplicate. Follow the steps on the next page, and you ‘ll be done in about half an hour.

Step 1

Make an imprint

Rub your bridge player over the carpet surrounding the damaged section, and note which management makes the carpet fibers stand up. Place the tender, without blades, over the damaged area, and make three clockwise turns to push digression a ring of carpet fibers and expose the back. Repeat these steps, including the rub, in the area where you ‘ll be extracting the temporary hookup .

Step 2

Get the tool ready

Screw on the cutter blades so that they will slice through the support when the cutter is turned clockwise. Attach the pivot screw ; it should project from the tender vitamin a far as the blades do .

Step 3

Cut away

Line up the tender with the circular mental picture made in Step 1. Push down until the pivot screw punches through
the backing ( you ‘ll hear a pop ). Rotate the cutter two or three turns with fast, even imperativeness. ( invalidate making besides many turns or you may slice through the slog that supports the piece. ) Remove the damaged musical composition, then use the lapp method acting to cut out the substitution patch. Draw an arrow on the back of the spot steer in the direction you rubbed the fibers to make them stand up.

Step 4

Stick the disk

Remove the protective back from
the adhesive disk, and dampen the magnetic disk with cool water to temporarily neutralize the glue. The disk is slightly larger than the eyepatch, so open the slit in the disk and slide its boundary under the carpet between the back and the embroider, as shown. When the adhesive material becomes brassy, in about 3 to 5 minutes, press down on the carpet around the disk ‘s border .

Step 5

Install the patch

Pluck out any loose carpet fibers around the edge of the fix and the surrounding carpet. Place a narrow bead of carpet-seam glue along the margin of the cutout. Align the arrow on the patch with the steering of the fibers in the respite of the rug, and stick the spot down firm onto the magnetic disk. You have 15 minutes to make adjustments before the glue sets .

Step 6

Blend the fibers

Straddle the edge of the spot with a star curler, and press down securely as you steer it twice around the perimeter of the patch. following, push the curler over the patch from different directions until the wrinkle disappears. Let the adhesive cure for 24 hours before you vacuum or walk on the while .

source :
Category : Tutorial

Related Posts

Trả lời

Email của bạn sẽ không được hiển thị công khai.