How To Paint Concrete Floors – Our Faux Farmhouse

I have been wanting to build the ultimate greenhouse for decades and when the opportunity arose, I ran with it ! I knew I wanted everything barely right, which included a focal detail on the floor. I had seen similar shock and wanted to give it a sample ! It was actually my first gear attack ever, and I could not be happier with the end solution of painting my concrete floors. It was decidedly a parturiency of love ! Let ’ s get into the tutorial, shall we ?
painting concrete floorsImage by: @southernhomeandfarm

Materials For Painting Concrete Floors:

  • Porch & patio floor paint (2 contrasting colors)
  • Paint tray
  • Stencils
  • 9” foam roller x 2
  • Scotch blue painter’s tape
  • Matte concrete sealer

BeforeAfterImages by: @southernhomeandfarm Before we begin, let me introduce myself ! I am Rhonda Kaiser with hypertext transfer protocol : //southernhomeandfarm.com I chose this undertaking for my greenhouse, which is featured on the spring 2022 cover of Texas Gardener magazine and inside the form 2022 edition of American Farmhouse Style magazine !
I ’ m so gladiolus you are here and it is such a pleasure to share this DIY with you all !

Steps For Painting Concrete Floors:

1. After the concrete was poured, I let it cure for 30 days *. I then power washed it and allowed it to dry. Next, I painted using a specialize floor key ( I used Behr Premium Floor Coatings, Porch & Patio Floor Paint, in both Slate Gray and Ultra Pure White by Behr Paint.

* note : a polish polish on concrete is best for painting. *
2. I purchased 4 large stencil patterns from Cutting Edge Stencils then taped them together to save time rolling, due to the square footage *. I started in the center of the room, around the greenhouse drain. I painted one section, then moved the integral taped stencil traffic pattern inaugural above the enfeeble, then below, allowing each section time to dry before returning to the following. I continually repeated this model. By going second and away, it saved me time !
Be careful not to go excessively fast or use excessively much paint, as it can creep under the stencil and smudge. I actually didn ’ thymine mind this when it happened, as it added to the vintage charm of the floor, which I was trying to achieve .
* note : I used a 9 ” foam roller, with a ½ ” nap, to apply the white stencil paint. *
BeforeDuringAlmost done!Images by: @southernhomeandfarm 3. I finished by spraying the floor with a concrete sealer, in a felt eat up ( I followed with a clean roller, with a 3/16 ” nap, to smooth out any bubbles ). I then installed wire racks from AceMart for housing my plants .
4. I added a chandelier from Pottery Barn and several items, including antique shutters and a vintage mercantile table found at Round Top Texas Antiques for extra charm .
here is the end consequence ! …
Images by: @southernhomeandfarm It was decidedly a hanker process but so worth the wait !

Yield: 1

How To Paint Concrete Floors

How To Paint Concrete Floors
Painting concrete floors can be a fantastic, low-cost way to upgrade your deck ! It ’ second very easy, it precisely requires clock and a little solitaire. today on the web log, I ‘m showing you my accurate summons for painting my concrete floors !
Prep Time

2 hours

Read more : Smoked Pork Shoulder

Active Time

4 hours

Total Time

6 hours

Materials

  • Porch & patio floor paint (2 contrasting colors)
  • Paint tray
  • Stencils
  • 9” foam roller x 2
  • Scotch blue painter’s tape
  • Matte concrete sealer

Instructions

    1. After the concrete was poured, I let it cure for 30 days*. I then power washed it and allowed it to dry. Next, I painted using a specialized floor paint.
    2. I purchased 4 large stencil patterns) then taped them together to save time rolling, due to the square footage*. I started in the center of the room, around the greenhouse drain. I painted one section, then moved the entire taped stencil pattern first above the drain, then below, allowing each section time to dry before returning to the next. I continually repeated this pattern. By going back and forth, it saved me time!
    3. I finished by spraying the floor with a concrete sealer, in a matte finish (I followed with a clean roller, with a 3/16” nap, to smooth out any bubbles).

See additional seasonal greenhouse views below:
Images by: @southernhomeandfarm Please join me for more home, garden, farm and vintage fun via:
Instagram : @ SouthernHomeandfarm
web : www.SouthernHomeandFarm.com
Facebook : southerly Home and Farm

Read more : Smoked Pork Shoulder

Pinterest : southern Home and Farm

For more awesome tutorials from Our Faux Farmhouse contributors, check out these recent posts:

source : https://thaitrungkien.com
Category : Tutorial

Related Posts

Trả lời

Email của bạn sẽ không được hiển thị công khai.