How to Open a Watch Back – Esslinger Watchmaker Supplies Blog

There are many reasons that you might need to open a watch back and a assortment of watch tools that can be used. If you need to change your watch battery or to replace a watch gasket, straighten the hands and remove debris, or completely replace a watch movement you will need to open the watch to do the oeuvre. There are many types of watch backs that can be opened in a diverseness of mechanical ways that sometimes are identical easy and can be done with very little feat and others that require a especial watch back opener that are sometimes dear done by a person with train or experience in watch repair .

Before you open any determine, make yourself a genial bill ; Is this a very expensive lookout ? If the answer is yes, be very careful in attempting to open the back. even cheap watches can sometimes be very unmanageable to open and can be easily damaged. Always check if the band clasp will get in your means when you try to open the case : some metal bands make it difficult to work in the rear because they are rigid and preceptor ’ thyroxine leave a lot room for your hands to work. If you need to remove the watch band to access the watch font, check out this article on watch band substitute or watch band rectify .

How to open the 3 most common types of case backs:

#1) A screw off “Waterproof” watch back will have notches for around the edges of the back of the watch. There are respective different tools you can use to open a watch back like this, check out these articles and videos to find the manner that works for you .

How to Open a Screw Down Case Back with Jaxa Wrench
How to Open a Screw Down Case Back with a Case Opener Ball
How to Open a Screw Down Case Back with a Case Wrench 
Compare Waterproof Screw Down Watch Back Opener Tools

#2) Pressure fit watch back or Snap Off watch back will have an wholly smooth binding, and it should still be plain and smooth on the back when you ’ re finished. The irregular type of watch lawsuit back is the pressure type. many watches with this character have a small dent or pass on the side or between the lugs where you can place your tongue .
sometimes this type of watch back can ’ t be closed with your hands and you will have to use a watch casing press to close it .
How to Close a Snap Off Watch Back with a Watch Press
How to Open a Snap Off Case Back 

#3) 4 screws watch back will have a smooth back that is held in place with four, or more, screws. Watches like this can be made of any kind of material combination from metal cases to plastic or rubber cases to many more kinds of materials .

 How to Open a Case Back with Screws

Click here for help on choosing the right tools to open your watch


These three types of watch case back are the most park, but there are many other types of watch cases equally well and many of these should only be opened by professional watchmakers or jewelers. Rolex, Baum Mercier, and aureate watches all require special tools and caution when opening them and it is well if this work and care is left to professionals because they are easily damaged. The best matter to do when you encounter an expensive watch is to leave it to a watchmaker ’ s manage, they have the tools and support needed to ensure your vigil remains undamaged during repair .
Another thing to watch out for is for watches that open from the front : if you look your watch over carefully and can not see a room to open the back, you may have to remove the crystal to change the battery or complete your compensate. We recommend that if you are at all uncertain of removing a quartz glass, you should leave the exploit to a watchmaker. Most of all, we encourage you to keep an outdoors mind and use a common sense before attempting to fix your determine on your own, if you don ’ thymine think you can do it, don ’ thymine be afraid of taking it to a professional .

source :
Category : Tutorial

Related Posts

Trả lời

Email của bạn sẽ không được hiển thị công khai.