9 DIY Smoker Plans for Building Your Own Smoker: Beginner to Experienced

SmokedBBQSource is supported by its readers. We may earn an consort commission at no extra monetary value to you if you buy through a connect on this page. Learn more .9 diy smoker plans
Building your own stag party is a great undertaking for any pitmasters who enjoy DIY and want the satisfaction of knowing they didn ’ t just cook the food, they built the smoker it was cooked in !
The first thing you need to do before you get to work is to decide what kind of smoker you are planning to build.

To help you get started, we ’ ve put together this list of 9 DIY smoker builds .
There ’ s a diverseness of different types of homemade smoker. To help you narrow it down we ’ ve included what tools you ’ ll want and links to where you can find step by step guides to the building process .
Lets get started .

1) Build your own ugly drum smoker

The atrocious brake drum smoker is about as basic and easy to build as it gets. The design here is to turn a 55-gallon food-grade drum into a stag party in fair a few hours, with minimal ferment and no weld .
The beginning thing you need to do is beginning your brake drum. You can pick up a brand new 55-gallon cram for around $ 150 or a use one for approximately $ 20 .
When you are buying your drum, make certain it hasn ’ thymine been treated with an epoxy coating to prevent rust. The epoxy will not react well to being heated up, and the stopping point thing you want is to be smoking your meat in toxic fumes .
once you ’ ve got your drum, you ’ ll need to scrub it down and then buff the insides with very well emery paper. The rest of the build is deoxyadenosine monophosphate simpleton as attaching four air intakes using readily available plumb supplies, building a ardor basket from expanded alloy enmesh, and attaching a handle to the hat .
once you ’ ve sourced your parts and tools, you can have your DIY despicable drum smoker built in an afternoon, and, best of all, you won ’ t need to weld anything .
If you like the estimate of an atrocious drum smoker but don ’ metric ton have space or the tools needed to assemble one yourself, the PitBarrel Cooker Company ’ s 18.5″ Classic Pit Barrel Cooker makes a great ready-to-use option .

Basic materials needed

  • 55-gallon epoxy-free food-grade drum with lid
  • 4x 24-inch-long ¾-inch threaded pipe 
  • ¾-inch threaded 90-degree elbow joints
  • 12 x 48 – inch piece of expanded metal mesh
  • Fine sandpaper
  • Various fittings (see step-by-step guide)

You might find it more commodious to order a DIY Drum Smoker Kit like this one from big Popp Smokers .

Tools needed

  • Angle grinder
  • Drill
  • Vise
  • Wrench
  • Cutting table

Skills required

  • Angle grinding
  • Sanding

Step-by-step guide

headway over to popularmechanics.com for a full breakdown of this build up, including an exhaustive list of all the parts you ’ ll need and check out howtobbqright.com for free PDF format CADD plans for your despicable brake drum smoker .
We besides have a steer to the best brake drum smokers you can buy if DIY isn ’ t your thing .

2) DIY flowerpot smoker

DIY BBQ Grill & Smoker made from Flower pots !DIY BBQ Grill & Smoker made from Flower pots!
Watch this video on YouTube
If you ’ ve got a sudden crave for fume meat but preceptor ’ thyroxine have a smoker, don ’ thymine panic. You ’ re merely one flying slip to your local anesthetic garden center aside from making your own out of a pair of cadaver flower pots .
Yup, you heard justly .
The first base thing you ’ ll necessitate to do is drill airflow holes in your cadaver planters. To do this without cracking your pot, begin with a smaller exercise sting and work astir to the right field size .
To control the airflow in your toilet, shave down a couple of wine corks indeed that they ’ ll fit in the air holes .
One of your clay pots is going to act as the charcoal holder. Place a brick in the bottom of that pot and put a small BBQ grate on top of the brick to hold the coals .
Your top potentiometer will be what holds in the pot. Both pots are going to get quite hot, so it ’ randomness best to fit the top batch with a handle through the dim-witted method acting of drilling two holes in the bottom and installing a standard U-bolt .
once the drill and cork paring is done, you are ready to go. If you have access to a roll of BBQ gasket videotape, you can use that to create a better seal between the pots, but it ’ s not the end of the populace if you don ’ triiodothyronine .
Put your startle coals on the scrape in the bottom of the pot and add the overcharge forest chips. Place your food above it on a basic round BBQ grillroom eat into and pop the circus tent pot on top to seal it .
Job done !

Basic materials needed

  • Two clay flower planters
  • BBQ gasket
  • U-Bolt (with nuts & washers)
  • Wine corks
  • Circular grill grate
  • Small BBQ charcoal grate

Tools required

  • Drill

Skills required

  • Drilling

Step-by-step guide

The belairdirect blog has a simpleton guide to assembling a Flower Pot Smoker, and you can watch them building it in real-time on YouTube .

3) Offset smoker using an old gas tank

Offset Pit Smoker BBQ BuildOffset Pit Smoker BBQ Build
Watch this video on YouTube
This build up is a honest bit more complicate, but if you have the skills and equipment, it ’ south surely a budget way to get yourself an outgrowth smoker .
The previous gasoline tank in question forms the cook chamber of beginning smoker, and the DIY region is adding the inning and the firebox .
A word of warning. Unlike the atrocious brake drum smoker or the flower toilet smoker, this is a complicated physique that requires specialist tools, skills, and a fair act of fourth dimension .
You ’ ll need to cut and weld together steel box sections to make the skeletal system, steel plate to make the firebox, and steel metro to make the lamp chimney .
There is besides some reasonably complicated metalwork needed to fit all the parts together and make sure there are no leaks and that the airflow correctly circulates the smoke in the cooking chamber .
however, if you are the kind of person that relishes a challenge and has a workshop, this is an excellent room to recycle an old accelerator cooler into something useful again .

Basic materials needed

  • An old gas tank
  • Steel box sections
  • Steel sheeting
  • Steel pipe

Tools required

  • Lathe
  • Angle grinder
  • Welding torch
  • Pivot drill
  • Vise

Skills required

  • Welding
  • Drilling
  • Lathe use
  • Advanced metalwork

Step-by-step guide

You can see a full video recording of this kind of smoker being built on the TJMake impart on YouTube and a a lot larger interpretation being created by Taste of Texas Barbecue .

4) DIY file cabinet smoker

DIY File Cabinet Smoker for $ 35 ! …. Broke CookingDIY File Cabinet Smoker for $35!....Broke Cooking
Watch this video on YouTube
Compared to building an set-back smoker using an old accelerator tank, this build is about a easy as it gets. All you need is an old metallic element file cabinet, a drill, and some spare part fourth dimension .
You ’ ll indigence to get yourself an unpainted filing cabinet because, as with the atrocious drum smoker, the epoxy key used on the motley ones to prevent rust releases toxins when heated up .
once you ’ ve got your file cabinet, which you can get for about $ 110 brand modern or for about $ 60 moment hand, you ’ ll indigence to coat it in hotness tolerant BBQ paint .
once you ’ ve done that, drill air out holes in the top of the cabinet and through the bottoms of the draw. then fit your newly smoker with two temperature gages on the side, one near the top, one near the center.

The lowest absorb will act as your firebox, and you can put standard BBQ racks in the other pull back to hold your food. The build time for this project is about 30 minutes, if that .

Basic materials needed

  • An unpainted filing cabinet
  • BBQ racks
  • Two temperature gauges
  • Heat resistant paint

Tools required

  • A drill

Skills required

  • Drilling

Step-by-step guide

You actually don ’ t need much of a guidebook to drilling holes in a charge cabinet, but if you want to see this kind of smoker in action, check out this video recording by Broke Yakin .

5) DIY smokehouse built from pallets

How to Build a smokehouse With Pallets Part 1 of 3How to Build a Smokehouse With Pallets Part 1 of 3
Watch this video on YouTube
Unlike a batch of the smokers on this tilt, this project is both very large and made wholly of wood .
The physique partially of this project is quite bare .
You deconstruct previous wooden pallets to get the bare-assed materials to build a dim-witted outhouse blueprint, which you then line with heavy-duty aluminum foil .
Pallet wood and aluminum blind door material are used to make the shelves that the food sits on and the bottom is a firebox made of aluminum flash .
You can buy used pallets for this project, it is besides possible to find complimentary pallets for reclaimed wood projects. If you can get your pallets for spare, you can quickly turn them into a stag party that is big enough to smoke a whole animal carcase for less than $ 100 .

Basic materials needed

  • 20-30 pallets, deconstructed
  • 2 1/2 inch screws 
  • 1 1/4 inch screws
  • Aluminum flashing
  • Corrugated tin roof (4’x3′) *this must be raw metal, not galvanized
  • Heavy-duty tin foil
  • Roll of aluminum screen
  • Handle (for the door)
  • Hinges (3)

Tools needed

  • Reciprocal saw with a bimetal blade (used to take pallets apart)
  • Drill gun, preferably a cordless one
  • Drill bits 1/8 bit and countersink bit
  • Measuring tape
  • Metal/tin snips
  • Utility knife
  • Skil saw, or table saw
  • Staple Gun
  • Safety Glasses
  • Work Gloves

Skills needed

  • Woodworking 
  • Drilling

Step-by-step guide

You can find a detailed template on how to disassemble your pallets and how to build them back up into your smoker over on diyprojects.com .
The web site besides features a three-part video showing you how to do it in real-time .

6) Trash can smoker

The trash can smoker is a great way to turn a commercially available hot plate and an aluminum rubbish can into a perfectly serviceable electric smoker .
You just cut a hole in the side of the rubbish can so that the flex from the hot plate has somewhere to go .
You then place the hot plate in the penetrate of the trashcan, and your wood chip box on top of it .
A standard round BBQ grillroom scrape holds the food at the top of the trashcan, and when the wood starts to smoke, you put the eyelid on .
You ’ ll indigence to drill some air holes in the lid to improve circulation and a hole in the side for a temperature gauge, but the hale work should take you about 30 minutes and monetary value less than $ 50 !

Basic materials needed

  • Trash Can w/ lid
  • Electric Hot Plate
  • Grating
  • Wood Chip Box
  • Temperature Gauge

Tools required

  • Drill with metal nibbler bit

Skills required

  • Drilling

Step-by-step guide

You can find a full bit-by-bit guide over at cruftbox.com, although, since you ’ re fair drilling a few holes in a methamphetamine can, you might not need one .

7) Wood and cinderblock smokehouse

atcnick at https://www.smokingmeatforums.com/
If you are looking to build something more permanent to smoke your food, a wood and cinderblock smokehouse lets you make a good-sized fume area without breaking the bank .
The design of this visualize is basically a cinder pulley base with a wooden smoke cabinet on top of it. The smoke comes from a humble inflame brick-lined firebox that is distinguish to the smoking cabinet .
The profit of building a woodwind and cinderblock smokehouse is that it is quick and easy to build, and once you are done, you have a permanent smoke location with a large measure of space in it .
This add space is ideal for smoking whole carcasses, huge links of sausages, big chunks of ham or beef, and your own cured meats .

Basic materials needed

  • Trash Can w/ lid
  • Electric Hot Plate
  • Grating
  • Wood Chip Box
  • Temperature Gauge

Tools required

  • 2 x 4 cedarwood
  • Black stove pipe
  • Stove door
  • Concrete blocks
  • Clay bricks
  • Fire bricks
  • Fire clay mortar
  • Bolts
  • Door hinges
  • Doorknob
  • Bolt lock
  • 2-1/2 inch deck screws
  • Wood screws
  • Three pieces 16 gauge steel plates
  • Metal mesh

Skills needed

  • Woodwork
  • Bricklaying

Step-by-step guide

You and find a boast by coke account of how this kind of stick out goes together over on the smokingmeatforums along with loads of helpful advice from early forum posters .

8) DIY smoker on a budget 

sou Vide DIY Smoker on a Budget How to build a smokerSous Vide DIY Smoker on a Budget How to build a smoker
Watch this video on YouTube
Some of the DIY smoker projects on our list are quick to build and cost under $ 50, but for the ultimate in low-cost DIY smokers, here is how you can create one in five minutes for around $ 10 .
All you need for this build are two aluminum thwart broil pans, some stainless steel steel cooling racks, woodwind pellets, bulldog clips, and some heavy-duty aluminum foil .
The body of your stag party is made of two aluminum foil baking pans, one on top of the other, held together with bulldog clips. Inside the pans are your stainless steel steel cooling racks, ideally propped up on a handy brick .
Wrap your wood pellets in foil until you have a shot burrito. You then cut an tune fix in the side of the lower pan and the lead of the amphetamine one .
Light your shot burrito with a blow flashlight and target it in the lower pan, following to the airhole in the side. Put your food on the steel racks, clip the pans together, and you ’ re done !

Basic materials needed

  • 2 aluminum foil baking pans
  • Stainless steel cooling rack or searing grates
  • Bricks (optional) 
  • Bulldog clips
  • Hickory pellets
  • Heavy-duty aluminum foil

Tools needed

  • Utility knife

Skills needed

  • None

Step-by-step guide

You can find a quick and easy guide to this bare smoker over at the Sous Vide Everything channel along with a great recipe for fume burgers .

9) Building a smoker from a propane tank

How to Build a Propane Tank SmokerHow to Build a Propane Tank Smoker
Watch this video on YouTube
This is an excellent model of how you can take something that would normally be discarded, like a 100lb run out propane tank, and turn it into the DIY bigger buddy of the always democratic Weber Smokey Mountain smoker
The beginning thing you are going to need to do is add a little water to your propane tank through the valve. It doesn ’ t have to be a lot of water, fair adequate that it will sit inside the tank where you are drilling or cutting and prevent the ignition or any residual propane .
Drill a hole in the bottom of the tank, then fill the entire tank with water through the valve to displace any remaining propane. When it ’ s entirely full, just let it drain out .
Using an angle bomber, cut the top with the valve on it off the tank. then you ’ ll need to draw out two doors, one for the firebox and one for the kernel shelves. The sections you cut out will just need to have hinges welded on and then reattached as your doors .
You ’ ll need to cut an air out consumption on the front of the firebox door and remove the valve at the top of the tank, replacing it with a steel pipe chimney .
The grates can be standard circular BBQ grates, if you can find ones that fit, or they can be made from expanded metal interlock. then all you need to do is cut a hole for a temperature gauge and you are basically done .
The original builders suggest using a round metallic element plate and large water stadium above the wood fire to both protect the kernel and retain and moderate the inner temperature.

Basic materials needed

  • Expired propane tank
  • Steel pipe
  • Expanded metal mesh
  • Hinges
  • Heat resistant handles
  • Temperature gauge 

Tools needed

  • Spot welder
  • Angle grinder
  • Drill

Skills needed

  • Metalworking
  • Welding

Step-by-step guide

Andrew W has an excellent bit-by-bit build scout to how to turn a discard propane cooler into a smoker on YouTube and he even throws in his recipe for rib cooked in his DIY device .

Wrapping it up

As you can see from our list above, getting a smoker doesn ’ triiodothyronine have to be expensive. You can make one from a pan can, flower pots, or even good aluminum pans and some stationery .
Do you have a DIY smoker you ’ d like to show off ? possibly you ’ ve built one of the ones we ’ ve listed, and you have some advice for other pitmasters ? We ’ five hundred love it if you told us in the comments below !

source : https://thaitrungkien.com
Category : Tutorial

Related Posts

Trả lời

Email của bạn sẽ không được hiển thị công khai.