Solved! How High Should I Mount My TV on the Wall?

Q: I’m eager to try out my new flat screen television on movie night, but I’m much less excited about getting it up on the wall. How high should I mount my TV? Do you have any advice for physically mounting the TV at the appropriate height?

A : How high to mount a television receiver is a question that dogs binge-watchers and cinephiles alike. Position the television excessively high or low, and you ’ ll coerce yourself and guests to crane your neck or slump your shoulders to take in the on-screen action. The ongoing discomfort apart, a mislaid television receiver can besides be a pain to remove and reinstall at another altitude, which is why it ’ s in your best interest to get its position—and the mount itself—right the first gear time. television manufacturers and family entertainment enthusiasts alike recommend mounting a flat-screen at eye horizontal surface for optimum wake, but the optimum television stature for you can depend on the acme of the spectator, the size of the television receiver, which room it is in, the stead in which you plan to watch the television receiver, and whether any rampart obstructions stand in your way. If you are wondering how high gear should a television be mounted in your family, read on to find out how to create the best wake experience potential .

The optimal TV height depends on one critical measurement. 

When figuring out the ideal acme to hang a television, most experts use the center point of the television as the main character point for hanging altitude. This helps eliminate worrying about a batch of the variables around the range of television receiver sizes. Unless you are hanging a television just for one person to use, making sure the center of the television receiver is at a comfortable watch altitude for most users is a typical goal.

ad Considering how the heights of family members vary, there international relations and security network ’ t a one-size-fits-all solution to an ideal television receiver mounting stature. Use an average of family member heights, then measure the distance from the floor to the modal eye level when sitting. This is the center point for mounting a television. While the general rule of using the center steer is an comfortable means to bypass dealing with the television ’ south measurements, the assumption is that the viewer will sit a fair outdistance away from the riddle. hush, many are used to modern american TVs that are a bite outsize for the rooms they occupy and the technical recommendations may sound odd. For case, experts recommend sitting about 10 feet away from a 75-inch television. For larger TVs, like 65-inch or 75-inch TVs, it can be uncomfortable to view the television receiver if it is excessively close, no matter how high or low it is hang. To take the guess and mathematics out of figuring out mounting height, an on-line television mounting height calculator can help determine the ideal viewing stature and distance .

Watching height will also play a large part in determining how high to hang a TV on a wall.

not every room has chairs that are the same acme. For model, an assailable floor plan with counter-height barroom stools, a sofa, and bar-height stools provides a challenge for hanging a television receiver. Counter-height browning automatic rifle stools are higher off the grate than sofa seats—anywhere from 24 to 29 inches to reach the counter. Bar stools have taller sitting heights at 29 to 33 inches off of the establish. One approach is using the average of all sitting heights, or focusing on the most use height when watching television receiver. Another method is hanging the television at the median standing acme, if it is viewed more much while standing. This may be the lawsuit in a plot room where other equipment ( e.g. a pool table or foosball postpone ) occupies the independent focus of the room and the television is mounted to a nearby wall to watch while you wait your turn. It besides applies in home gymnasium, where you ’ d be watching television receiver while on a treadmill or while using early gymnasium equipment. ad

Be mindful of the size of the room and the space that you have to work with.

It might not be possible to mount a television at the ideal stature if that would cause it to run into an existing appliance, structural component, or piece of furniture. Simply status the television as close to viewing eye level as possible while leaving some clearance between the obstruction and the television. Above shelves or an entertainment center, an appropriate come of clearance might be 4 to 6 inches—about the like distance you ’ vitamin d hang a mirror above a chest of drawers. For rooms where children play, it ’ s normally best to mount the television high adequate so it is out of reach.

If you are thinking about mounting a television above a fireplace, though, it ’ s significant to make surely that there are noncombustible barriers between the fireplace and the television receiver. Without the proper clearances and materials around a forest stave or fireplace, heat-related damage to the screen and more hard danger can occur. Before hanging a television receiver over a fireplace or other wood-fired appliance, make sure the local build up regulations were followed for installation. Plus, leave at least a headroom of 6 to 12 inches from the top of the mantel to the bottom of the television with a noncombustible barrier surrounding the entire wood-fired appliance to minimize the risk of wrong. Mounting a television any distance above a fireplace may void the guarantee on the television, so read the ticket print before you do thus .

If you install a TV at a higher-than-usual height, you may also want to install hardware that allows you to adjust the TV’s viewing angle.

When considering how high to hang television receiver, remember that you shouldn ’ thyroxine always position your television so high that it requires viewers to tilt their heads up more than 35 degrees from eye degree in order to see the top of the television sieve, according to standards laid out by the Society of Motion Picture & Television Engineers. now, that ’ s not typically a problem for a television receiver at center flat, but screens mounted in a game room or well above a wall obstruction may run into neck-strain issues. ad fortunately, tilting a television down—effectively lowering the lead of the television screen—can avail you get away with positioning it higher than center level without causing discomfort or neck sift over an elongated period of clock time. This requires upgrading from a basic low-profile mount ( which is stationary ) to one of two other types of television wall mounts : a tilting rampart mount, which can move up or down, or full-motion mount, which can swivel in all directions. Keep in mind that successful television wall wax installation depends on using mounting hardware that is sized appropriately for the weight and size of the television receiver and is allow for the character of wall ( forget wall, scantling rampart, or plaster-and-lath wall ) .

Outline the TV’s proposed location on the wall before you break out your tools. 

Before mounting a television receiver, it ’ mho crucial to run the proposed mount acme by your family members. Use magnetic tape and newspaper to mark out the area on the wall where you plan to mount the television receiver, then gather the syndicate around to look at the area on the wall and notice how everyone is tilting their heads. This will help confirm that the height selected is the correctly one for your family before you start making holes in the wall. After the altitude is confirmed, the best way to mount a television receiver is to measure twice and mount once. With the correct type of wall mount kit, a few basic tools, and attention to detail, you can mount your television at precisely the right acme on the wall for your needs. Follow these tips to determine the best height at which to hang a flat-screen television receiver :

  1. Screw the two mounting arms (vertical brackets) from the mounting kit to the back of the TV. Then secure the mounting arms to the provided wall plate as if completing the wall mount assembly.
  2. Measure the mounting center height up the wall from three horizontal locations and mark the spots with a pencil. This is where the centerline of the TV will hit.
  3. Divide the height of your TV by two. Measure and mark this distance above the center mounting mark—this is where the top of the TV will hit. Measure and mark the same distance below the center mounting mark—there is where the bottom of the TV will hit.
  4. Mark an outline of the TV shape onto the wall using painter’s tape and do the same around the four corners of the wall mounting plate. (You will see a small box within a larger box when this exercise is through.)
  5. Check your outlines with a level to make sure you’re satisfied with the way the TV will appear. Then proceed to grab a stud finder and toolbox to finish mounting your flat screen TV.

Final Thoughts

Mounting a raw television receiver is an excite project, but deciding where to mount it on a wall can be intimidating. Your television receiver is a heavy and expensive detail, and getting it correctly is important. Deciding on the mounting altitude depends on a few factors, and the most critical is the spectator ’ randomness viewing altitude. Using the properly hardware that is sized appropriately for the burden of the television receiver and taking into retainer the type of wall upon which you ’ ll mount the television receiver are besides significant to the success of this project.

Read more : Smoked Pork Shoulder

Do n’t want to do it yourself ? Get a pro to mount the television for you. Receive free, no-commitment estimates from licensed technicians today .Find local prosHomeAdvisor Logo +BobVila.com Logo

source : https://thaitrungkien.com
Category : Tutorial

Related Posts

Trả lời

Email của bạn sẽ không được hiển thị công khai.